Antenna Dual Output Patch Lead for USB or WiFi Wireless Broadband (TS9)


SKU: ACC-ROC790 Categories: ,

Use this patch lead to connect your Telstra wireless broadband device to an external antenna. The dual ends of this lead plug into the two antenna sockets on your wireless USB device or wi-fi device; the other end of the cable has an FME-male connector that plugs into the FME-female socket on the end of the single cable coming from your existing cellular mobile antenna (for instance, like one of these or these). *

Length of this patch lead: 0.5 m

Compatible with:

  • Telstra USB 4G (Sierra AirCard 320U)
  • Telstra¬†BigPond Mobile Wi-Fi 4G (Sierra AirCard 760S)
  • Telstra WI-FI 4G Advanced Pro X (Huawei E5786)
  • Telstra WI-FI 4G Advanced II (AirCard 790S)
  • Telstra WI-FI 4G Advanced III (AirCard 810S)
  • Telstra 4GX USB + WI-FI plus (Huawei E8372)
  • Telstra WI-FI 4G Advanced III (AirCard 810S)
  • Telstra 4GX Wi-Fi Pro / Advanced Pro 7 (Huawei E5787)
  • Telstra 4GX Modem (Huawei B618s-65d)
  • Telstra 4GX Hotspot (ZTE MF985T)
  • Telstra 5G Wi-fi Pro (ZTE MU500)
  • Optus 4G Plus Wi-Fi (AirCard 800S)
  • Optus 4G WiFi Modem (Huawei B628)
  • Telstra Netgear Nighthawk M1
  • Telstra Netgear Nighthawk M2
  • Telstra Netgear Nighthawk M5
  • Telstra Netgear Nighthawk M6
  • Telstra Netgear Nighthawk M6 Pro

Most of the above models have two antenna connectors so use both connectors with the two ends of this patch lead. If your dongle only has one connector, use only one of the ends on the patch lead.

* If your antenna’s cable has an SMA connector on it instead of FME, you will also need to order a FME (F) to SMA (F) adaptor.

Shopping Cart